MasterCueV7 System
Contact Us
Our flagship product for event cueing, where full control is require of all connected devices. Ethernet allows for a controlled infrastructure between devices and the connected world of the control room including Companion and its Streamdeck.
Web page for remote access and control of settings.With 6 USB ports to control the graphics machines you can have main, back-up, slides and video machines multiple systems on the same LAN with individual set up and control.
Our proven i2Net for multidrop and cable range (1 mile / 1500m) provides a simple connectivity solution for MCV7 system and the i2Net devices.
Following on and improve the MasterCue legacy.
– Remote RF receivers (x2 for diversity)
– i2LP lamp, for confidence to the user all is working
– i2WB Wired button, you would not use wireless mics with out a wired back up.
– Comms 4 pin and 5 pin on hum free connections.
Specifications
Power:
Universal mains in 100V to 264VAC 30W
Line out power on i2Net 28V 20W
Signals:
USB, i2Net, Ethernet, PoE Ethernet
Dimensions D x W x Hmm (inch)
Main unit (controller):
110 (4” 5/16) x 225 (8” 7/8) x 115 (4” 1/2)
964g (34oz)
RF receiver:
95 (3” 2/4) x 55 (2” 1/8) x 190 (7 1/2”)
395g (013 7/8oz)
i2Net Lamp (i2LP):
60 (2” 3/8) x 102 (4” 1/16) x 70 (2” 3/4)
168g (6oz)
i2Net Wired button:
35 (1” 3/8) x 50 (2” 3/16) x 85 (3” 3/8)
114g (4oz)
Accessories
Included with the MCV7
4 and 5 pin coms cables, Wired button, Confidence lamp, 6 USB cables, Mains cable
Note: You will need your own intercom system fully installed. Note XLR cables are not included as standard.
MasterCue V7 has been in design for many years. It has been designed to work with Ethernet systems and it is a requirement of sale that the user / technician understands Ethernet practises. If you do not need Ethernet then look at the MicroCue3 as the V7 will provide a layer of technology you may not need.
3 Year Limited Factory Warranty
Web page for remote access and control of settings.With 6 USB ports to control the graphics machines you can have main, back-up, slides and video machines multiple systems on the same LAN with individual set up and control.
Our proven i2Net for multidrop and cable range (1 mile / 1500m) provides a simple connectivity solution for MCV7 system and the i2Net devices.
Following on and improve the MasterCue legacy.
– Remote RF receivers (x2 for diversity)
– i2LP lamp, for confidence to the user all is working
– i2WB Wired button, you would not use wireless mics with out a wired back up.
– Comms 4 pin and 5 pin on hum free connections.
Specifications
Power:
Universal mains in 100V to 264VAC 30W
Line out power on i2Net 28V 20W
Signals:
USB, i2Net, Ethernet, PoE Ethernet
Dimensions D x W x Hmm (inch)
Main unit (controller):
110 (4” 5/16) x 225 (8” 7/8) x 115 (4” 1/2)
964g (34oz)
RF receiver:
95 (3” 2/4) x 55 (2” 1/8) x 190 (7 1/2”)
395g (013 7/8oz)
i2Net Lamp (i2LP):
60 (2” 3/8) x 102 (4” 1/16) x 70 (2” 3/4)
168g (6oz)
i2Net Wired button:
35 (1” 3/8) x 50 (2” 3/16) x 85 (3” 3/8)
114g (4oz)
Accessories
Included with the MCV7
4 and 5 pin coms cables, Wired button, Confidence lamp, 6 USB cables, Mains cable
Note: You will need your own intercom system fully installed. Note XLR cables are not included as standard.
MasterCue V7 has been in design for many years. It has been designed to work with Ethernet systems and it is a requirement of sale that the user / technician understands Ethernet practises. If you do not need Ethernet then look at the MicroCue3 as the V7 will provide a layer of technology you may not need.
3 Year Limited Factory Warranty
How to use the MasterCueV7
Download MasterCueV7 Brochure (566 KB)
Download MasterCueV7 Quickstart Guide (497KB)
Download MasterCueV7 Plugable Guide (12.3 MB)
Download MasterCueV7 Manual (19.7 MB)
Download MasterCueV7 Quickstart Guide (497KB)
Download MasterCueV7 Plugable Guide (12.3 MB)
Download MasterCueV7 Manual (19.7 MB)
To Download Updates
Please read our licence agreement below, click to confirm, and download updates.
License Agreement
Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that Interspace Industries. (“i2”) already distributed to you included with i2’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by i2, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
Interspace industries expressly disclaims any warranty for software. Software is provided “as is” without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement of copyright, patent, trade secret, or any other proprietary rights of any third party. In no event shall interspace industries be liable for any general, special, direct, indirect, consequential, incidental, or other damages resulting from the use of or inability to use software.
Article 3. When to upgrade
Please make sure you are not on site at an event when you update your system! Should the unit fail to load, it may cripple the upgrade and prevent it from returning to service. This is unlikely but seriously, better safe than sorry!
Please read our licence agreement below, click to confirm, and download updates.
License Agreement
Please read this Agreement carefully before downloading this upgraded version software (“FIRMWARE”). By downloading FIRMWARE, you are agreeing to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, you are not authorized to download FIRMWARE.
Article 1. License
FIRMWARE is the upgraded version of software that Interspace Industries. (“i2”) already distributed to you included with i2’s product(s) (“ORIGINAL FIRMWARE”). All copyrights and other proprietary rights to FIRMWARE are retained by i2, and nothing contained herein shall be construed, expressly or implicitly, as transferring or granting to you any right, license, or title unless otherwise explicitly granted under this Agreement.
Article 2. NO Warranty
Interspace industries expressly disclaims any warranty for software. Software is provided “as is” without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement of copyright, patent, trade secret, or any other proprietary rights of any third party. In no event shall interspace industries be liable for any general, special, direct, indirect, consequential, incidental, or other damages resulting from the use of or inability to use software.
Article 3. When to upgrade
Please make sure you are not on site at an event when you update your system! Should the unit fail to load, it may cripple the upgrade and prevent it from returning to service. This is unlikely but seriously, better safe than sorry!